Upravit stránku

LED chip projector consists of hard aluminium ribbed body of a 58 mm diameter and of an exchangeable body tube of a 44 mm diameter with optics, where there radiating angles from 5 to 40 degrees can be chosen. In the bottom part of the hard aluminium ribbed body a high-performance LED chip  12 V / 30 W / 6500 K is placed; its service life is 50 000 hours, at least.  The chromatic temperature of the LED chip can be chosen in the range from 3000 K up to 6500 K. The efficiency of the LED chip projector can be fluently regulated in the range of 5 to 100%.  After unscrewing the exchangeable tube with optics, it will be possible to place a round glass with a diameter of 37 mm with the lens speed of 32 mm into the upper part of the ribbed body, and pictures or LOGOS can be put onto and the LED chip projector can screen them into the desired distance.

Luminous intensity and illuminated diameter of the LED chip projectors with three radiating angles of tubes with optics:

  • Tube with optics and radiating angle 5O, distance  1.0 m, luminous intensity  max.. 19 200 Lx,  illuminated diameter 100 mm. 
  • Tube with optics and radiating angle 5O, distance  3.0 m, luminous intensity  max..  1 850 Lx, illuminated diameter 300 mm. 
  • Tube with optics and radiating angle 12O, distance  1.0 m, luminous intensity  max..  11 200 Lx, illuminated diameter 200 mm. 
  • Tube with optics and radiating angle 12O, distance  30 m, luminous intensity  max.    1 080 Lx, illuminated diameter 600 mm. 
  • Tube with optics and radiating angle 28O, distance  1.0 m, luminous intensity  max.  2 100 Lx, illuminated diameter 470 mm. 
  • Tube with optics and radiating angle 28O, distance  3.0 m, luminous intensity  max.  320 Lx, illuminated diameter 1 410 mm. 

The LED chip projector is fixed with a clamp into the holder in the “U” shape.  After the setting in the desired position the projector is fixed with two arresting screws. It is switched on with a round switch placed on a  plastic box with a regulator, after connection of the safety power supply source of 230 V – 50 Hz / 24V = /1.5 A / 36 W into the supply net 230 V – 50 HZ.